High-Load Powder Sintering Belt Suppliers | Durable Clinch Edge Type Conveyor from China Factory
Products Description
- Thick 3.0-5.0mm wire diameter withstands heavy PM parts
- Oxidation-stable surface (mass gain <1mg/cm² @800°C/100h)
- Anti-flake guarantee (ISO 14644-1 Class 5 compliant)
- ISO 9001:2015
- ASTM A480
- MPIF Standard 35
Technical Advantage
- Material: 314/310S Stainless Steel
- Continuous operation: 800-1050°C (H₂/N₂ atmosphere)
- Thermal cycling: 2000+ cycles (ASTM E606)
- Wire diameter: 3.0-5.0mm (customizable)
- Load rating: Up to 5kg/cm² (vs. 3kg/cm² industry standard)
- Tensile strength: 800-1000 N/mm²
- Surface oxide layer adhesion: Grade A (ASTM D3359)
- Mass gain: <1mg/cm² after 100h @800°C
- Zero particulate shedding (ISO 14644-1 Class 5)
Application Scenarios
| PM Process | Challenge | Huada Solution |
|---|---|---|
| High-Load Sintering | Deformation under heavy parts | 5.0mm wire + cross-rod reinforcement |
| High-Temp Debinding | Surface oxidation contamination | 310S with stable oxide layer |
| Large PM Parts Transfer | Mesh sagging | 4.5mm wire @50mm pitch design |
| Clean Sintering | Oxide flake contamination | Electropolished Ra ≤0.6μm surface |
Technical Parameters
| Parameter | Huada PM Belt | Industry Standard |
|---|---|---|
| Max Operating Temp | 1050°C | 750°C |
| Load Capacity | 5kg/cm² | 3kg/cm² |
| Oxidation Mass Gain | <1mg/cm² (100h@1000°C) | 3-5mg/cm² |
| Wire Diameter Options | 3.0-5.0mm | 2.0-4.0mm |
Case Study: Automotive PM Component Supplier
- Zero part deformation with 4.2mm wires under 4.8kg/cm² loads
- No oxide contamination in 10,000 sintered gears
- Reduced 30% maintenance costs over 18 months
Detail Pictures
Frequently Asked Questions (FAQ)
What is the maximum operating temperature for Huada PM Belts?
Our conveyor belts are engineered to withstand continuous operations at temperatures ranging from 800°C up to 1050°C in H₂/N₂ atmospheres.
How much load capacity can the clinch edge conveyor belt handle?
Huada PM belts offer a heavy-load capacity of up to 5kg/cm², which is significantly higher than the 3kg/cm² industry standard, preventing deformation under heavy parts.
Does the belt cause surface flaking during high-temperature exposure?
No, we provide a zero surface flaking guarantee. The belts are ISO 14644-1 Class 5 compliant, ensuring clean sintering with zero particulate shedding.
What materials are used to manufacture these conveyor belts?
They are manufactured using high-quality 314 and 310S Stainless Steel, providing exceptional oxidation stability and thermal cycling endurance.
What are the available wire diameter options?
The wire diameter ranges from 3.0mm to 5.0mm. We also offer customizable options to meet specific heavy-load requirements.
What quality certifications do Huada's conveyor belts hold?
Our products are fully certified and strictly comply with ISO 9001:2015, ASTM A480, and MPIF Standard 35 specifications.